# after update not working, openSuse Leap 15.1, paraview 5.6/5.7
**URL:** https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537
**Category:** ParaView Support
**Created:** [June 8, 2020, 11:16am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537 "2020-06-08T11:16:21Z")
**Posts on this page:** 13
**Page:** 1
### Author:  [@Astrid](https://discourse.paraview.org/u/Astrid)
#### Post date: [June 8, 2020, 11:16am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/1 "2020-06-08T11:16:21Z")
Hello!
I am using openSuse Leap 15.1 and paraview 5.6 as rpm from this
and/or paraview 5.7 as rpm from science repo.
All had worked very well in the past.
After a packageupdate from suse it is not working any more… ☹
I deinstall the nvidia-driver from nvidia-repo too, but no success.
The error message is:
Unable to find a valid OpenGL 3.2 or later implementation.
If I ignore it and want to open one paraview existing case, it
crashes.
I do not want to compile it by myself, I want to use the
suse-rpm.
How can I get it work again?
Regards, Astrid
---
### Author:  [@mwestphal](https://discourse.paraview.org/u/mwestphal)
#### Post date: [June 9, 2020, 1:50am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/2 "2020-06-09T01:50:48Z")
Hello.
What is the output of `glxinfo` ?
---
### Author:  [@Astrid](https://discourse.paraview.org/u/Astrid)
#### Post date: [June 9, 2020, 8:05am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/3 "2020-06-09T08:05:16Z")
All output or only some special lines, e.g. wiht “version” inside?
---
### Author:  [@mwestphal](https://discourse.paraview.org/u/mwestphal)
#### Post date: [June 9, 2020, 8:44am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/4 "2020-06-09T08:44:36Z")
Indeed, you OpenGL version and vendor would be the interesting part.
---
### Author:  [@Astrid](https://discourse.paraview.org/u/Astrid)
#### Post date: [June 9, 2020, 8:47am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/5 "2020-06-09T08:47:10Z")
Thanx, so
glxinfo | grep OpenGL
will be the best choice?
---
### Author:  [@Astrid](https://discourse.paraview.org/u/Astrid)
#### Post date: [June 9, 2020, 9:11am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/6 "2020-06-09T09:11:16Z")
glxinfo | grep OpenGL
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 740/PCIe/SSE2
OpenGL core profile version string: 4.5.0 NVIDIA 390.132
OpenGL core profile shading language version string: 4.50 NVIDIA
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 4.6.0 NVIDIA 390.132
OpenGL shading language version string: 4.60 NVIDIA
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 390.132
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
OpenGL ES profile extensions:
---
### Author:  [@mwestphal](https://discourse.paraview.org/u/mwestphal)
#### Post date: [June 9, 2020, 9:46am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/7 "2020-06-09T09:46:47Z")
Can you try with our binary release :
[https://www.paraview.org/download/](https://www.paraview.org/download/)
---
### Author:  [@Astrid](https://discourse.paraview.org/u/Astrid)
#### Post date: [June 9, 2020, 10:50am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/8 "2020-06-09T10:50:22Z")
Are it binaries, ready to use for leap 15.1? Or should I have to compile it?
In the past very many difficulties with self compiling. And I have several computers, and compile it on all…
That was the reason in the past, that I chose to prefer the suse rpm.
---
### Author:  [@Astrid](https://discourse.paraview.org/u/Astrid)
#### Post date: [June 9, 2020, 12:29pm UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/9 "2020-06-09T12:29:30Z")
Perhaps I can figure out now the reason for not running: to flip back from 5.7 from science repo I reinstall only paraview 5.6 from suse repo. This still keeps the error.
But if I flip back allll packages which had come from science repo
back to suse repo, now it seems running again. 🙂
---
### Author:  [@olesenm](https://discourse.paraview.org/u/olesenm)
#### Post date: [June 9, 2020, 1:43pm UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/10 "2020-06-09T13:43:15Z")
I had something similar quite a while ago, it was unrelated to ParaView, but a kernel mismatch in nvidia drivers. ParaView just happened to be the only thing triggering it though, which lead to the wrong conclusion.
On the other side, had issues with paraview-5.7 from the science repo. It wouldn’t load due to libhdf5. Seems to have been a mismatch with the libhdf5 still coming from the leap15.1 repo instead of the science repo.
---
### Author:  [@Astrid](https://discourse.paraview.org/u/Astrid)
#### Post date: [June 9, 2020, 3:30pm UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/11 "2020-06-09T15:30:30Z")
Thanx for information.
Very confusing with the different packages and repos…
I am happy, that is running (only local… ☹ ) again now.
Regards, Astrid
---
### Author:  [@olesenm](https://discourse.paraview.org/u/olesenm)
#### Post date: [June 9, 2020, 7:06pm UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/12 "2020-06-09T19:06:51Z")
leap15.2 is not far away, might get sorted there.
---
### Author:  [@mwestphal](https://discourse.paraview.org/u/mwestphal)
#### Post date: [June 10, 2020, 1:37am UTC](https://discourse.paraview.org/t/after-update-not-working-opensuse-leap-15-1-paraview-5-6-5-7/4537/13 "2020-06-10T01:37:18Z")
> [@Astrid](#):
>
> Are it binaries, ready to use for leap 15.1?
Yes, they are binaries we are distributing, to be used anywhere.