# stream tracers not loading and tool tips not showing

**URL:** <https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665>\
**Category:** ParaView Support\
**Created:** [May 18, 2024, 10:29pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665 "2024-05-18T22:29:53Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Kenichiro-Yoshimi](https://discourse.paraview.org/letter_avatar_proxy/v4/letter/k/ecc23a/32.png) [@Kenichiro-Yoshimi](https://discourse.paraview.org/u/Kenichiro-Yoshimi)\
**Post date:** [June 18, 2024, 6:11am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/21 "2024-06-18T06:11:50Z")

</div>

You will probably need to load both **defaultFaces** and **internalMesh** and separate them later in the following steps:

1. In the _Mesh Resions_ of pv.foam, check **internalMesh** (which contains the velocity vectors) and **path/defaultFaces** and load the data.
2. Use the `Stream Tracer filter` to find the streamlines.
3. For the geometry, use the `Extract Block filter` or `MultiBlock Inspector` to display only the **defaultFaces**.

 ![extract_block](https://discourse.paraview.org/uploads/default/original/2X/6/6190c0522dc0b6c78de2445be198bf6c1120beba.jpeg)

---

<div class="post-metadata">

**Author:** ![Lt72884](https://discourse.paraview.org/user_avatar/discourse.paraview.org/lt72884/32/13081_2.png) [@Lt72884](https://discourse.paraview.org/u/Lt72884)\
**Post date:** [June 18, 2024, 6:33am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/22 "2024-06-18T06:33:23Z")

</div>

i will try this out. How do you increase the thickness of the stream tracers? All the ones i have seen in the tutorials are very thin and wispy.

Are you using point cloud as well?

im testing this out in a few moments.

thanks

---

<div class="post-metadata">

**Author:** ![Lt72884](https://discourse.paraview.org/user_avatar/discourse.paraview.org/lt72884/32/13081_2.png) [@Lt72884](https://discourse.paraview.org/u/Lt72884)\
**Post date:** [June 18, 2024, 6:40am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/23 "2024-06-18T06:40:34Z")

</div>

WOOT. I FINALLY got something

 ![image](https://discourse.paraview.org/uploads/default/original/2X/1/1a1affde3413f1fcc58126a106220fcd1ffd19f5.png)

I noticed that under the properties for the point cloud stream tracer that i only have U available as the vector in the drop down, nothing else is listed. How do i view the other vectors and increase the tracer size to be a little thicker?

thanks

---

<div class="post-metadata">

**Author:** ![Kenichiro-Yoshimi](https://discourse.paraview.org/letter_avatar_proxy/v4/letter/k/ecc23a/32.png) [@Kenichiro-Yoshimi](https://discourse.paraview.org/u/Kenichiro-Yoshimi)\
**Post date:** [June 18, 2024, 6:49am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/24 "2024-06-18T06:49:38Z")

</div>

Does your data include vector quantities other than U (flow velocity)?

The thickness of the streamlines can be adjusted in `Line Width` in the advanced settings (turn on the gear icon).

 ![line_width](https://discourse.paraview.org/uploads/default/original/2X/c/c399733e9eda92fbec70ec6aa65de3c44866059f.png)

---

<div class="post-metadata">

**Author:** ![Lt72884](https://discourse.paraview.org/user_avatar/discourse.paraview.org/lt72884/32/13081_2.png) [@Lt72884](https://discourse.paraview.org/u/Lt72884)\
**Post date:** [June 18, 2024, 7:02am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/25 "2024-06-18T07:02:26Z")

</div>

this is what paraview shows i have. I should have more than just “U” because when i change the type from the drop down, the rocket fin changes with respect to whatever i pick

 ![image](https://discourse.paraview.org/uploads/default/original/2X/1/12b1b739eeb627799f59de5f627d30d9e18f9064.png)

but the stream tracer filter only shows U in its list…

When i ran the CFD, shouldnt that do more than just velocity?

this video is the video i followed that told me to uncheck internal mesh. they got it to work, dont know why mine wont

[![](https://discourse.paraview.org/uploads/default/original/2X/2/2f9b48ae1a254e303d9145b0bb261bc5649472b8.jpeg "CFD Results - How to analyse OpenFOAM data with ParaView - 25-minute Tutorial") ](https://www.youtube.com/watch?v=kczZPc4M-ms)

---

<div class="post-metadata">

**Author:** ![Lt72884](https://discourse.paraview.org/user_avatar/discourse.paraview.org/lt72884/32/13081_2.png) [@Lt72884](https://discourse.paraview.org/u/Lt72884)\
**Post date:** [June 18, 2024, 7:42pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/26 "2024-06-18T19:42:15Z")

</div>

“Does your data include vector quantities other than U (flow velocity)?” how do i verify this and how do i make sure others are added? I thought they were added since the cfdof workbench showed the plot of all the residuals, not just U

---

<div class="post-metadata">

**Author:** ![Kenichiro-Yoshimi](https://discourse.paraview.org/letter_avatar_proxy/v4/letter/k/ecc23a/32.png) [@Kenichiro-Yoshimi](https://discourse.paraview.org/u/Kenichiro-Yoshimi)\
**Post date:** [June 18, 2024, 8:15pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/27 "2024-06-18T20:15:44Z")

</div>

The stream tracer is applied to vector variables. Therefore, if ‘U’ is the only option available from the drop-down list, it implies that ‘U’ is the vector variable, while the others are likely scalar variables. You can also verify whether a variable is vectorial by looking into the Information tab, which presents the maximum and minimum values of each component for the variables.

---

<div class="post-metadata">

**Author:** ![Lt72884](https://discourse.paraview.org/user_avatar/discourse.paraview.org/lt72884/32/13081_2.png) [@Lt72884](https://discourse.paraview.org/u/Lt72884)\
**Post date:** [June 18, 2024, 9:20pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/28 "2024-06-18T21:20:21Z")

</div>

ok, maybe i need to be asking a different question.

Are there supposed to be other vector variables available?

If U is the only available one, can i still use the calculator option in paraview to calculate forces such as Cd, Cp, etc?

Thanks for the help

---

<div class="post-metadata">

**Author:** ![Kenichiro-Yoshimi](https://discourse.paraview.org/letter_avatar_proxy/v4/letter/k/ecc23a/32.png) [@Kenichiro-Yoshimi](https://discourse.paraview.org/u/Kenichiro-Yoshimi)\
**Post date:** [June 19, 2024, 11:14am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/29 "2024-06-19T11:14:19Z")

</div>

The calculation of Cp, Cd, etc. must be performed according to the defined procedures, some of which can be found on YouTube you have previously mentioned and other websites.

However, to consider the impact of viscous forces in drag force calculations, wall shear stresses are necessary. It appears that calculating the velocity gradient tensor near the wall surface, which is essential for this purpose, in ParaView may not yield sufficiently accurate results. Therefore, I recommend performing Cp, Cd, etc. calculations within OpenFOAM for greater accuracy.

---

<div class="post-metadata">

**Author:** ![Lt72884](https://discourse.paraview.org/user_avatar/discourse.paraview.org/lt72884/32/13081_2.png) [@Lt72884](https://discourse.paraview.org/u/Lt72884)\
**Post date:** [June 19, 2024, 3:25pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/30 "2024-06-19T15:25:25Z")

</div>

I am not sure exactly how to do that. I don’t use the command line for open foam. I use the workbench in free CAD.

So I’m not entirely sure how to accomplish that. But what’s going on with the current data that I have that makes it difficult to calculate the coefficient of pressure and drag?

Thank you. 🙂

---

<div class="post-metadata">

**Author:** ![Kenichiro-Yoshimi](https://discourse.paraview.org/letter_avatar_proxy/v4/letter/k/ecc23a/32.png) [@Kenichiro-Yoshimi](https://discourse.paraview.org/u/Kenichiro-Yoshimi)\
**Post date:** [June 19, 2024, 8:15pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/31 "2024-06-19T20:15:10Z")

</div>

I believe the pressure coefficient (Cp) can be calculated by applying a _Calculator_ filter to `defaultFaces` , as outlined in the following documentation: [OpenFOAM: User Guide: pressure](https://www.openfoam.com/documentation/guides/latest/doc/guide-fos-field-pressure.html)

For the drag coefficient (Cd) of `defaultFaces`, the proposed procedure is:

1. Calculate the Wall Shear Stress (WSS) (search within this discourse for the method).
2. Compute the drag force using the method described in the aforementioned YouTube video, where the product of the normal vector and static pressure is calculated for each element. It remains uncertain whether the element area should also be included in the calculation.
3. Manually calculate the Cd based on its definition.

---

<div class="post-metadata">

**Author:** ![Lt72884](https://discourse.paraview.org/user_avatar/discourse.paraview.org/lt72884/32/13081_2.png) [@Lt72884](https://discourse.paraview.org/u/Lt72884)\
**Post date:** [June 19, 2024, 9:10pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/32 "2024-06-19T21:10:38Z")

</div>

ok, cool. ill look into it. I think one of my issues is in the CFD OpenFOAM workbench of freecad, i picked high mach number for the physics model and DES as the turbulance type. I think this triggered the workbench to use the HISA solver rather than simplefoam.

I am only guessing because in the D:/CFDDUMP/case/0 pressure file, the dimensions are:

[0,-2,-2,0,0,0]

meaning time would have to be an exponent in the denominator since we cant travel back in time.

using the filter in paraview called integrate varibles i think is causing issues since integrating my not be the right step.

Do you know how to switch between simplefoam and hisa in the CFDOF workbench? or is it automatically trigged based on settings i pick?

thanks

---

<div class="post-metadata">

**Author:** ![Kenichiro-Yoshimi](https://discourse.paraview.org/letter_avatar_proxy/v4/letter/k/ecc23a/32.png) [@Kenichiro-Yoshimi](https://discourse.paraview.org/u/Kenichiro-Yoshimi)\
**Post date:** [June 20, 2024, 12:27am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/33 "2024-06-20T00:27:45Z")

</div>

I apologize, but I am not familiar with CFDOF. 😅

---

<div class="post-metadata">

**Author:** ![Lt72884](https://discourse.paraview.org/user_avatar/discourse.paraview.org/lt72884/32/13081_2.png) [@Lt72884](https://discourse.paraview.org/u/Lt72884)\
**Post date:** [June 20, 2024, 12:35am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/34 "2024-06-20T00:35:22Z")

</div>

It’s okay 🙂 it’s a workbench and free CAD that is a UI for open foam. But I’m guessing anytime I use a higher Mach number and compressible flow that it triggers open foam to use the high speed aerodynamic solver rather than simple foam. So I have to figure out how to make open foam compute all my Force coefficients for me rather than having paraview because integration won’t work with the high-speed aerodynamic solver cuz of the way it handles the pressures. It uses real pressure instead of a normalized pressure

---

<div class="post-metadata">

**Author:** ![Atmaja](https://discourse.paraview.org/user_avatar/discourse.paraview.org/atmaja/32/15746_2.png) [@Atmaja](https://discourse.paraview.org/u/Atmaja)\
**Post date:** [January 6, 2025, 3:06pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/35 "2025-01-06T15:06:33Z")

</div>

Guys Help me, I think I’ve got same problem with stream tracer.  
The path line can’t see. Please somebody check my file, thanks kindly for your reply guys…  
[Flow Test 1\_0\_0.vtu](https://discourse.paraview.org/uploads/short-url/qZEcLdSJ18YKNPBjf9Vl6HCy0rB.vtu) (1.2 MB)

---

<div class="post-metadata">

**Author:** ![Kenichiro-Yoshimi](https://discourse.paraview.org/letter_avatar_proxy/v4/letter/k/ecc23a/32.png) [@Kenichiro-Yoshimi](https://discourse.paraview.org/u/Kenichiro-Yoshimi)\
**Post date:** [January 6, 2025, 11:51pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/36 "2025-01-06T23:51:27Z")

</div>

I checked your data and found that the value of the variable `U` is almost zero, indicating that no flow field exists. This is likely the reason why you are unable to draw streamlines.  
To draw streamlines, you need to use data where a flow field is present or set the `Terminal Speed` in the `Streamline Parameters` to a very small value.

 ![terminal_speed](https://discourse.paraview.org/uploads/default/original/2X/2/24df31fd5292426c36715a9094f3e6b6b93b732f.png)

---

<div class="post-metadata">

**Author:** ![Atmaja](https://discourse.paraview.org/user_avatar/discourse.paraview.org/atmaja/32/15746_2.png) [@Atmaja](https://discourse.paraview.org/u/Atmaja)\
**Post date:** [January 7, 2025, 9:31am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/37 "2025-01-07T09:31:58Z")

</div>

Arigatō @Kenichiro-Yoshimi, I’m not realizes that setting and I’ve upgrade my Paraview to last version (before I use 5.10 there’s no terminal speed setting)

 ![image](https://discourse.paraview.org/uploads/default/original/2X/7/74e0b3c9f00eb511d1e7dfd1d22866cc4a20c220.png)  
well done, now I see the path line, glad to be here to discuss easy thing but valuable for me…!!!

Cheers, greeting from Indonesia @Kenichiro-Yoshimi 🙏

---

<div class="post-metadata">

**Author:** ![Atmaja](https://discourse.paraview.org/user_avatar/discourse.paraview.org/atmaja/32/15746_2.png) [@Atmaja](https://discourse.paraview.org/u/Atmaja)\
**Post date:** [January 8, 2025, 3:06am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/38 "2025-01-08T03:06:59Z")

</div>

One thing, for velocity legend what the kind of unit? M/s or others

---

<div class="post-metadata">

**Author:** ![Kenichiro-Yoshimi](https://discourse.paraview.org/letter_avatar_proxy/v4/letter/k/ecc23a/32.png) [@Kenichiro-Yoshimi](https://discourse.paraview.org/u/Kenichiro-Yoshimi)\
**Post date:** [January 8, 2025, 10:30am UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/39 "2025-01-08T10:30:39Z")

</div>

ParaView does not have specific units; it follows the units used in the analysis.

---

<div class="post-metadata">

**Author:** ![Atmaja](https://discourse.paraview.org/user_avatar/discourse.paraview.org/atmaja/32/15746_2.png) [@Atmaja](https://discourse.paraview.org/u/Atmaja)\
**Post date:** [January 8, 2025, 12:00pm UTC](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665/40 "2025-01-08T12:00:19Z")

</div>

Ok Thanks a lot

[Previous page](https://discourse.paraview.org/t/stream-tracers-not-loading-and-tool-tips-not-showing/14665.md?page=1)
