# Surface plot or polyline plot

**URL:** <https://discourse.paraview.org/t/surface-plot-or-polyline-plot/7485>\
**Category:** ParaView Support\
**Created:** [June 25, 2021, 2:08pm UTC](https://discourse.paraview.org/t/surface-plot-or-polyline-plot/7485 "2021-06-25T14:08:05Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![Qutadah\_Rababah](https://discourse.paraview.org/user_avatar/discourse.paraview.org/qutadah_rababah/32/7033_2.png) [@Qutadah\_Rababah](https://discourse.paraview.org/u/Qutadah_Rababah)\
**Post date:** [March 23, 2022, 1:06am UTC](https://discourse.paraview.org/t/surface-plot-or-polyline-plot/7485/13 "2022-03-23T01:06:44Z")

</div>

Ok so I am using it now, I did extract selections and it works perfectly.

Here is attached state file with my adjustments and the following screenshot is taken from it.

 ![Offset_On_Blades_Extract_each_Blade](https://discourse.paraview.org/uploads/default/original/2X/3/33944e489f966646665365b61b00f50331dfcbe7.png)

[Offset\_on\_blade\_0.05\_extracted.pvsm](https://discourse.paraview.org/uploads/short-url/cU7Y87Z5bTpF97HsLhf21NBGgZI.pvsm) (2.5 MB)

I have another question also related:

\*\* What I would like to do is not really an offset, but rather take a polyline with exactly between two blades and plot against it. But I came across this thread and thought it might be an option, is there an easier way to do it? Since having an offset gives me two lines in the middle of the passages. Here is the thread i opened about it:

> [@Slice along Polyline y axis](https://discourse.paraview.org/t/slice-along-polyline-y-axis/9259):
>
> Hello, I am trying to slice along a polyline, however it says it only slices along the z-direction. I would like to slice it in the y-direction. Here is my state file and the needed .foam file. I would really like to plot along the polyline ! OR is there any way to change the mesh orientation that the polyline is in the XY plane? Here are the necessary files: 1- [polyline-passage-latest.pvsm](https://discourse.paraview.org/uploads/short-url/6omUAMTTUj9XTolo5AXjKWm0l05.pvsm) (518.7 KB) 2- vtk file : [https://1drv.ms/u/s!AogsRnDcMk-phK5IbvZK1XsaeX9jkQ?e=kiIdT…](https://1drv.ms/u/s!AogsRnDcMk-phK5IbvZK1XsaeX9jkQ?e=kiIdT6)

Thanks!

---

_[View the full topic](https://discourse.paraview.org/t/surface-plot-or-polyline-plot/7485)._
