# Top

**URL:** https://discourse.paraview.org/top.md?page=129&period=all

[Latest](https://discourse.paraview.org/latest.md) · [Categories](https://discourse.paraview.org/categories.md) · [Tags](https://discourse.paraview.org/tags.md)

**Page:** 130

---

## [clipping box to recreate water column](https://discourse.paraview.org/t/clipping-box-to-recreate-water-column/14882)

<div class="topic-metadata">

**Author:** [@\_Marco](https://discourse.paraview.org/u/_Marco)\
**Replies:** 5\
**Last updated:** [June 19, 2024, 1:41pm UTC](https://discourse.paraview.org/t/clipping-box-to-recreate-water-column/14882 "2024-06-19T13:41:04Z")

</div>

Hi there. I am probably overthinking this, and most likely there is a very trivial way of achieving this. However, here is my question: I am attempting to recreate a similar image using PV, where a parametric water col…

---

## [Exporting only one CSV from pipeline](https://discourse.paraview.org/t/exporting-only-one-csv-from-pipeline/7289)

<div class="topic-metadata">

**Author:** [@PA\_M](https://discourse.paraview.org/u/PA_M)\
**Replies:** 1\
**Last updated:** [May 25, 2021, 12:57pm UTC](https://discourse.paraview.org/t/exporting-only-one-csv-from-pipeline/7289 "2021-05-25T12:57:10Z")

</div>

Hello everyone, I have been working on Paraview from an XMF file, which corresponds to a single time step from DNS computations. From it, I have applied several Calculators, Programmable Filters and so forth, followed b…

---

## [embed the paraview controls handle inside a dockable window in c#](https://discourse.paraview.org/t/embed-the-paraview-controls-handle-inside-a-dockable-window-in-c/13137)

<div class="topic-metadata">

**Author:** [@may\_soun](https://discourse.paraview.org/u/may_soun)\
**Replies:** 3\
**Last updated:** [October 30, 2023, 11:14am UTC](https://discourse.paraview.org/t/embed-the-paraview-controls-handle-inside-a-dockable-window-in-c/13137 "2023-10-30T11:14:32Z")

</div>

Hello, How can I embed the paraview controls handle inside a dockable window. What should i do!, what are the steps !! (known that i did download the code source of paraview and build it in my machine). I really appre…

---

## [Local axes are displayed in the nodes, not in elements](https://discourse.paraview.org/t/local-axes-are-displayed-in-the-nodes-not-in-elements/13112)

<div class="topic-metadata">

**Author:** [@Andr](https://discourse.paraview.org/u/Andr)\
**Replies:** 4\
**Last updated:** [October 26, 2023, 2:00pm UTC](https://discourse.paraview.org/t/local-axes-are-displayed-in-the-nodes-not-in-elements/13112 "2023-10-26T14:00:33Z")

</div>

Hello. I currently try to visualize exodus file, obtained as a result from MOOSE framework. There is an issue with local axes displaying: they are displayed at the nodes, but i need it to be assingned to elemetns. sm…

---

## [Displaying data outside the color map](https://discourse.paraview.org/t/displaying-data-outside-the-color-map/7915)

<div class="topic-metadata">

**Author:** [@Andrei](https://discourse.paraview.org/u/Andrei)\
**Replies:** 2\
**Last updated:** [September 3, 2021, 5:45am UTC](https://discourse.paraview.org/t/displaying-data-outside-the-color-map/7915 "2021-09-03T05:45:47Z")

</div>

Dear Colleagues! How to force areas outside the range of the color map appear differently (for example, gray fill)

---

## [How to adjust time of retrying connection to the pvserver?](https://discourse.paraview.org/t/how-to-adjust-time-of-retrying-connection-to-the-pvserver/5310)

<div class="topic-metadata">

**Author:** [@sharaborin](https://discourse.paraview.org/u/sharaborin)\
**Replies:** 2\
**Last updated:** [September 10, 2020, 3:00pm UTC](https://discourse.paraview.org/t/how-to-adjust-time-of-retrying-connection-to-the-pvserver/5310 "2020-09-10T15:00:54Z")

</div>

Dear All, I am using pvserver via VPN connection. Sometimes VPN disconnects and pvserver stops. Fortunately, it gives me the opportunity to save a state, However, I have huge files and preprocessing demands some time. I…

---

## [Docker: Endpoint configuration issue?](https://discourse.paraview.org/t/docker-endpoint-configuration-issue/3878)

<div class="topic-metadata">

**Author:** [@skoudoro](https://discourse.paraview.org/u/skoudoro)\
**Replies:** 0\
**Last updated:** [March 24, 2020, 11:57pm UTC](https://discourse.paraview.org/t/docker-endpoint-configuration-issue/3878 "2020-03-24T23:57:25Z")

</div>

Hello Paraviewweb Team, I am trying to set up a Paraviewweb server with custom apps using docker container. After following this tutorial http://kitware.github.io/paraviewweb/docs/container\_overview.html, I succeed to …

---

## [3D Surface Contour - Extract Selection](https://discourse.paraview.org/t/3d-surface-contour-extract-selection/9893)

<div class="topic-metadata">

**Author:** [@Akash](https://discourse.paraview.org/u/Akash)\
**Replies:** 1\
**Last updated:** [June 25, 2022, 4:25am UTC](https://discourse.paraview.org/t/3d-surface-contour-extract-selection/9893 "2022-06-25T04:25:10Z")

</div>

Hi, I am trying to extract coherent structures with alpha \>= 0.5. But I am getting those 3D surfaces disrupted as you can see in the fig I attached. I understand why it’s happening, its because some of the grid points m…

---

## [Paraview crash when change time step](https://discourse.paraview.org/t/paraview-crash-when-change-time-step/6351)

<div class="topic-metadata">

**Author:** [@devinInOttawa](https://discourse.paraview.org/u/devinInOttawa)\
**Replies:** 1\
**Last updated:** [February 1, 2021, 9:22am UTC](https://discourse.paraview.org/t/paraview-crash-when-change-time-step/6351 "2021-02-01T09:22:33Z")

</div>

cavity - Copy.zip (1.1 MB) Greetings, I used Paraview to view my Openfoam results. It crashed when I changed time step. I tried different versions of Paraview. And it did not work. Could you give me some hints what I c…

---

## [problem in the speed of the river when running](https://discourse.paraview.org/t/problem-in-the-speed-of-the-river-when-running/9842)

<div class="topic-metadata">

**Author:** [@Bryan\_David](https://discourse.paraview.org/u/Bryan_David)\
**Replies:** 3\
**Last updated:** [June 20, 2022, 7:51am UTC](https://discourse.paraview.org/t/problem-in-the-speed-of-the-river-when-running/9842 "2022-06-20T07:51:51Z")

</div>

Hi, I’m new here and I’m starting to use the program. I recently started a project to see how the currents of a river and its speeds are managed, so I do the simulation in OpenFoam and it is successful when I pass it to…

---

## [PVPython for NetCDF to write .csv files](https://discourse.paraview.org/t/pvpython-for-netcdf-to-write-csv-files/5409)

<div class="topic-metadata">

**Author:** [@vrkssai](https://discourse.paraview.org/u/vrkssai)\
**Replies:** 0\
**Last updated:** [September 23, 2020, 2:12pm UTC](https://discourse.paraview.org/t/pvpython-for-netcdf-to-write-csv-files/5409 "2020-09-23T14:12:53Z")

</div>

I’m trying to convert a NetCDF file to a .csv format so that the data along with the coordinates could be imported into something else. I have tried using the GUI to do that and also pvpython script (thanks to @mwestphal …

---

## [Doctest within ParaVIEW](https://discourse.paraview.org/t/doctest-within-paraview/12975)

<div class="topic-metadata">

**Author:** [@atismer](https://discourse.paraview.org/u/atismer)\
**Replies:** 4\
**Last updated:** [October 25, 2023, 7:11pm UTC](https://discourse.paraview.org/t/doctest-within-paraview/12975 "2023-10-25T19:11:17Z")

</div>

Dear Community, I would like to run Doctests within Python. I created a simple testClass to describe my problem: class testClass: """ \>\>\> import sys \>\>\> render = "paraview.simple" in sys.modules \>\>\> if render: …

---

## [Could not load the Qt platform plugin "xcb": ParaView 5.13.3 on SLES 12 SP5](https://discourse.paraview.org/t/could-not-load-the-qt-platform-plugin-xcb-paraview-5-13-3-on-sles-12-sp5/16466)

<div class="topic-metadata">

**Author:** [@kguthrie](https://discourse.paraview.org/u/kguthrie)\
**Replies:** 1\
**Last updated:** [April 15, 2025, 7:52am UTC](https://discourse.paraview.org/t/could-not-load-the-qt-platform-plugin-xcb-paraview-5-13-3-on-sles-12-sp5/16466 "2025-04-15T07:52:35Z")

</div>

I’m attempting to install ParaView on a system running SLES 12 SP5. I downloaded from the “Download ParaView” page, ParaView-5.13.3-MPI-Linux-Python3.10-x86\_64.tar.gz. After extracting, when attempting to run I get the f…

---

## [MS Edge Browser Couldn't Display Glance Objects](https://discourse.paraview.org/t/ms-edge-browser-couldnt-display-glance-objects/10502)

<div class="topic-metadata">

**Author:** [@weichennewcastle](https://discourse.paraview.org/u/weichennewcastle)\
**Replies:** 1\
**Last updated:** [October 28, 2022, 5:09pm UTC](https://discourse.paraview.org/t/ms-edge-browser-couldnt-display-glance-objects/10502 "2022-10-28T17:09:54Z")

</div>

Dear Paraview Community, I have been hosting 3d models with ParaView Glance on web. Recent error occurred in MS Edge browser with Paraview Glance while other browsers are working fine. See below: ParaViewGlance: 4.14.0 …

---

## [Paraview in VM](https://discourse.paraview.org/t/paraview-in-vm/9156)

<div class="topic-metadata">

**Author:** [@Bhargav\_Durga\_Prasad](https://discourse.paraview.org/u/Bhargav_Durga_Prasad)\
**Replies:** 1\
**Last updated:** [March 10, 2022, 2:21pm UTC](https://discourse.paraview.org/t/paraview-in-vm/9156 "2022-03-10T14:21:23Z")

</div>

Hi, Can anyone suggest me a proper vm instance (Using aws or azure or google cloud) with gpu support inorder to run paraview v5.9.1 without any issues.

---

## [ParaViewWeb : simple server has built in primitive ?](https://discourse.paraview.org/t/paraviewweb-simple-server-has-built-in-primitive/6866)

<div class="topic-metadata">

**Author:** [@Nicholas\_Yue](https://discourse.paraview.org/u/Nicholas_Yue)\
**Replies:** 1\
**Last updated:** [April 5, 2021, 3:25pm UTC](https://discourse.paraview.org/t/paraviewweb-simple-server-has-built-in-primitive/6866 "2021-04-05T15:25:41Z")

</div>

Hi, I am just getting started learning ParaViewWeb and tried the following command ./bin/pvpython ./share/paraview-5.9/web/visualizer/server/pvw-visualizer.py --content ./share/paraview-5.9/web/visualizer/www/ …

---

## [ParaView Client Data Server Render Server Multi-Clients](https://discourse.paraview.org/t/paraview-client-data-server-render-server-multi-clients/13257)

<div class="topic-metadata">

**Author:** [@hasraz](https://discourse.paraview.org/u/hasraz)\
**Replies:** 2\
**Last updated:** [November 20, 2023, 10:53pm UTC](https://discourse.paraview.org/t/paraview-client-data-server-render-server-multi-clients/13257 "2023-11-20T22:53:59Z")

</div>

I’m trying to use --multi-clients mode for a Client-Data-Server-Render-Server mode setup. I start the data server by using the following command: pvdataserver --multi-clients and I start the render server by using the …

---

## [get animation from paraview to unity](https://discourse.paraview.org/t/get-animation-from-paraview-to-unity/10235)

<div class="topic-metadata">

**Author:** [@sarisa19](https://discourse.paraview.org/u/sarisa19)\
**Replies:** 0\
**Last updated:** [September 1, 2022, 7:41pm UTC](https://discourse.paraview.org/t/get-animation-from-paraview-to-unity/10235 "2022-09-01T19:41:46Z")

</div>

Hey, i have some deo data that i can display in paraview. However I want the model and animation of it in unity. Is there a way to achieve that?

---

## [SyntaxError: invalid decimal literal](https://discourse.paraview.org/t/syntaxerror-invalid-decimal-literal/13904)

<div class="topic-metadata">

**Author:** [@JSArocena](https://discourse.paraview.org/u/JSArocena)\
**Replies:** 6\
**Last updated:** [February 9, 2024, 9:39am UTC](https://discourse.paraview.org/t/syntaxerror-invalid-decimal-literal/13904 "2024-02-09T09:39:59Z")

</div>

Dear Support, I’m a new here, I would like to know how to deal with this error message from ParaView: After I load state the converted vtk file, error message appear in Paraview as shown below: Thank you in advance…

---

## [PVD files and vtkhdf support](https://discourse.paraview.org/t/pvd-files-and-vtkhdf-support/15664)

<div class="topic-metadata">

**Author:** [@jpmorr](https://discourse.paraview.org/u/jpmorr)\
**Replies:** 1\
**Last updated:** [October 31, 2024, 8:31am UTC](https://discourse.paraview.org/t/pvd-files-and-vtkhdf-support/15664 "2024-10-31T08:31:31Z")

</div>

So I’ve slowly been putting together a workflow to use ParaView for visualising my simulation results and one of the final steps is to create an index file for easy opening of multiple meshes, however I’m having difficul…

---

## [Save current setting as default does not work for selection label property](https://discourse.paraview.org/t/save-current-setting-as-default-does-not-work-for-selection-label-property/9470)

<div class="topic-metadata">

**Author:** [@Kei\_Yamamoto](https://discourse.paraview.org/u/Kei_Yamamoto)\
**Replies:** 1\
**Last updated:** [April 20, 2022, 11:05am UTC](https://discourse.paraview.org/t/save-current-setting-as-default-does-not-work-for-selection-label-property/9470 "2022-04-20T11:05:09Z")

</div>

Hi, I’m using paraview GUI Version: 5.9.0-RC3 on my Mac book pro. When I try to save current setting as default on Selection Label Properties, I get the following error ERROR: In /opt/glr/paraview/paraview-ci/build/su…

---

## [Translation and Rotation of 2D image (geotiff) - rotating along Y axis same as rotating along Z axis](https://discourse.paraview.org/t/translation-and-rotation-of-2d-image-geotiff-rotating-along-y-axis-same-as-rotating-along-z-axis/7058)

<div class="topic-metadata">

**Author:** [@mcossette](https://discourse.paraview.org/u/mcossette)\
**Replies:** 0\
**Last updated:** [April 22, 2021, 8:58pm UTC](https://discourse.paraview.org/t/translation-and-rotation-of-2d-image-geotiff-rotating-along-y-axis-same-as-rotating-along-z-axis/7058 "2021-04-22T20:58:57Z")

</div>

Hi, I wish to transform (translate and rotate) a 2D image (geotiff) using the “Transforming” settings in the image’s properties. Rotation along the X-axis works well, however rotating along the Y axis results in a rotat…

---

## [Building Paraview : ninja:build stopped](https://discourse.paraview.org/t/building-paraview-ninja-build-stopped/11788)

<div class="topic-metadata">

**Author:** [@apple55688](https://discourse.paraview.org/u/apple55688)\
**Replies:** 2\
**Last updated:** [April 23, 2023, 8:57pm UTC](https://discourse.paraview.org/t/building-paraview-ninja-build-stopped/11788 "2023-04-23T20:57:54Z")

</div>

Hello ! I am currently attempting to build ParaView in Windows10 on my laptop by following \[Getting Started compilation guide\]. I installed vs2019 and qt5.15.2. I run cmake successfully,but it is failed when I run …

---

## [Removing outliers from region](https://discourse.paraview.org/t/removing-outliers-from-region/9249)

<div class="topic-metadata">

**Author:** [@s195t](https://discourse.paraview.org/u/s195t)\
**Replies:** 0\
**Last updated:** [March 22, 2022, 9:22am UTC](https://discourse.paraview.org/t/removing-outliers-from-region/9249 "2022-03-22T09:22:27Z")

</div>

Dear all, What I am trying to do is, given a specific clip/slice, remove the data which has a very high value and very low frequency. I tried implementing in python some kind of “dynamic” condition for the threshold but…

---

## [Distributed rendering in programmable source](https://discourse.paraview.org/t/distributed-rendering-in-programmable-source/591)

<div class="topic-metadata">

**Author:** [@Rustem](https://discourse.paraview.org/u/Rustem)\
**Replies:** 0\
**Last updated:** [September 18, 2018, 12:45pm UTC](https://discourse.paraview.org/t/distributed-rendering-in-programmable-source/591 "2018-09-18T12:45:21Z")

</div>

Hello! We are trying to use distributed rendering with custom programmable sources. Here is what we have right now: pm = vtk.vtkProcessModule.GetProcessModule() ppid = pm.GetPartitionId() reader = vtk.vtkXMLPolyDataRe…

---

## [VeloView xml file](https://discourse.paraview.org/t/veloview-xml-file/10609)

<div class="topic-metadata">

**Author:** [@Naeem\_Ahmed](https://discourse.paraview.org/u/Naeem_Ahmed)\
**Replies:** 1\
**Last updated:** [October 27, 2022, 7:14am UTC](https://discourse.paraview.org/t/veloview-xml-file/10609 "2022-10-27T07:14:13Z")

</div>

The new release of VeloView does not contain the xml file for Velarray even though the document and demo show that it supports this sensor. Any idea where I can get hold of this file to connect with the scanner? Thanks

---

## [Paraview 5.11.0-RC1 - Crash on startup on Ubuntu 20.04](https://discourse.paraview.org/t/paraview-5-11-0-rc1-crash-on-startup-on-ubuntu-20-04/10341)

<div class="topic-metadata">

**Author:** [@Nicholas\_Yue](https://discourse.paraview.org/u/Nicholas_Yue)\
**Replies:** 1\
**Last updated:** [September 16, 2022, 5:03pm UTC](https://discourse.paraview.org/t/paraview-5-11-0-rc1-crash-on-startup-on-ubuntu-20-04/10341 "2022-09-16T17:03:04Z")

</div>

Hi, I am hoping to try out 5.11.0-RC1 but I got this immediately upon starting paraview alloc(): invalid size (unsorted) Loguru caught a signal: SIGABRT Cheers

---

## [Is it possible to programmatically select "Color By" field in ParaView Glance?](https://discourse.paraview.org/t/is-it-possible-to-programmatically-select-color-by-field-in-paraview-glance/8338)

<div class="topic-metadata">

**Author:** [@johans](https://discourse.paraview.org/u/johans)\
**Replies:** 1\
**Last updated:** [November 8, 2021, 4:29pm UTC](https://discourse.paraview.org/t/is-it-possible-to-programmatically-select-color-by-field-in-paraview-glance/8338 "2021-11-08T16:29:50Z")

</div>

I have made stand alone “views” with Glance importing vtp data using Glance.importBase64Dataset. I would like to programmatically select the first data field (lets say labeled “A”), instead of glance opening with empty d…

---

## [Praview 5.9 not working with NetCDF-CF files](https://discourse.paraview.org/t/praview-5-9-not-working-with-netcdf-cf-files/7122)

<div class="topic-metadata">

**Author:** [@vrkssai](https://discourse.paraview.org/u/vrkssai)\
**Replies:** 1\
**Last updated:** [May 18, 2021, 8:53pm UTC](https://discourse.paraview.org/t/praview-5-9-not-working-with-netcdf-cf-files/7122 "2021-05-18T20:53:44Z")

</div>

Paraview 5.9 version has many variables/data fields missing for netCDF4-CF compliant files. however the same file 5.8.1 displays these variables. Is this a bug or has support for netCDF4 being discontinued?

---

## [Qt modules under GPLv3](https://discourse.paraview.org/t/qt-modules-under-gplv3/4737)

<div class="topic-metadata">

**Author:** [@kw.yun](https://discourse.paraview.org/u/kw.yun)\
**Replies:** 1\
**Last updated:** [July 2, 2020, 1:24pm UTC](https://discourse.paraview.org/t/qt-modules-under-gplv3/4737 "2020-07-02T13:24:57Z")

</div>

Hi, I’m considering some modification and redistribution of ParaView in a binary form and found that ParaView has some GPL-licensed Qt modules which are not applicable for closed-source redistribution. https://www.para…

---

## [Instantiating a lot of quads for an unstructured grid](https://discourse.paraview.org/t/instantiating-a-lot-of-quads-for-an-unstructured-grid/3368)

<div class="topic-metadata">

**Author:** [@vbuck](https://discourse.paraview.org/u/vbuck)\
**Replies:** 0\
**Last updated:** [January 20, 2020, 8:59am UTC](https://discourse.paraview.org/t/instantiating-a-lot-of-quads-for-an-unstructured-grid/3368 "2020-01-20T08:59:19Z")

</div>

Hi everyone! For a plugin I am trying to write, I need to create a surface consisting of about 300k quads. These quads are regularly spaced on the x & y axes, but have varying z levels. The surface is also not rectangu…

---

## [getting data from histogram using python script.](https://discourse.paraview.org/t/getting-data-from-histogram-using-python-script/924)

<div class="topic-metadata">

**Author:** [@senthilathiban](https://discourse.paraview.org/u/senthilathiban)\
**Replies:** 0\
**Last updated:** [November 16, 2018, 4:24pm UTC](https://discourse.paraview.org/t/getting-data-from-histogram-using-python-script/924 "2018-11-16T16:24:17Z")

</div>

Hi, I have a openfoam simulation with lagrangian data. I need to count the number of particles in a zone. I have done this using sphere clip and histogram. The histogram produces one row with diameter and number of part…

---

## [Export Animated Scene from python](https://discourse.paraview.org/t/export-animated-scene-from-python/10569)

<div class="topic-metadata">

**Author:** [@Xabier\_Morales\_Ferez](https://discourse.paraview.org/u/Xabier_Morales_Ferez)\
**Replies:** 2\
**Last updated:** [October 24, 2022, 9:13am UTC](https://discourse.paraview.org/t/export-animated-scene-from-python/10569 "2022-10-24T09:13:00Z")

</div>

Hi, I’m just automatizing the export of several animated scenes, I’m just wondering if there is a similar command to ExportView() for Export Animated Scene from the GUI. Kind regards, Xabier

---

## [Paraview infinite loading of fluent case](https://discourse.paraview.org/t/paraview-infinite-loading-of-fluent-case/10489)

<div class="topic-metadata">

**Author:** [@wilove](https://discourse.paraview.org/u/wilove)\
**Replies:** 2\
**Last updated:** [October 14, 2022, 7:52am UTC](https://discourse.paraview.org/t/paraview-infinite-loading-of-fluent-case/10489 "2022-10-14T07:52:38Z")

</div>

Hello everyone, I want to read a fluent model (.cas + .dat) in Paraview. The model is obtained from Icepak but, since the solver used is fluent, I am usually able to import the files into Paraview. However, when I impo…

---

## [Problem Use value from Programmable filter in trace](https://discourse.paraview.org/t/problem-use-value-from-programmable-filter-in-trace/3289)

<div class="topic-metadata">

**Author:** [@dolesch](https://discourse.paraview.org/u/dolesch)\
**Replies:** 2\
**Last updated:** [January 8, 2020, 11:04am UTC](https://discourse.paraview.org/t/problem-use-value-from-programmable-filter-in-trace/3289 "2020-01-08T11:04:16Z")

</div>

Hi all, is there a way to use a value computed with a programmable filter within a trace. As a kind of a return value. Thanks in advance Darius

---

## [Paraview macOS xQuartz "Painter not Active"](https://discourse.paraview.org/t/paraview-macos-xquartz-painter-not-active/10142)

<div class="topic-metadata">

**Author:** [@ST1023](https://discourse.paraview.org/u/ST1023)\
**Replies:** 1\
**Last updated:** [August 29, 2022, 5:06am UTC](https://discourse.paraview.org/t/paraview-macos-xquartz-painter-not-active/10142 "2022-08-29T05:06:34Z")

</div>

I have been able to open Paraview using xQuartz for the past couple of months with no problems. But lately, I have been getting the response: “QPainter:: …: Painter not active” for most of the QPainter attributes. This…

---

## [Problem with building EGL version of ParaView 5.10.0-RC1](https://discourse.paraview.org/t/problem-with-building-egl-version-of-paraview-5-10-0-rc1/8223)

<div class="topic-metadata">

**Author:** [@joeh](https://discourse.paraview.org/u/joeh)\
**Replies:** 1\
**Last updated:** [November 10, 2021, 6:25pm UTC](https://discourse.paraview.org/t/problem-with-building-egl-version-of-paraview-5-10-0-rc1/8223 "2021-11-10T18:25:39Z")

</div>

There seems to be a problem with building the EGL version of ParaView 5.10.0-RC1. Where the EGL include directory that is found by the superbuild does not get passed to the paraview build that requires it. The superbui…

---

## [Problem in building Paraview with superbuild on Linux os](https://discourse.paraview.org/t/problem-in-building-paraview-with-superbuild-on-linux-os/4956)

<div class="topic-metadata">

**Author:** [@Superstarimage](https://discourse.paraview.org/u/Superstarimage)\
**Replies:** 1\
**Last updated:** [August 4, 2020, 1:16pm UTC](https://discourse.paraview.org/t/problem-in-building-paraview-with-superbuild-on-linux-os/4956 "2020-08-04T13:16:47Z")

</div>

Dear All Hi, I am trying to build Paraview 5.8.0 on Linux os with superbuild. With the option mpi and qt5 on, I finally make the paraview sucessfully. Such as: But when I use the command \[sudo make install\], the Ubun…

---

## [Paraview issue on Big Sur](https://discourse.paraview.org/t/paraview-issue-on-big-sur/6239)

<div class="topic-metadata">

**Author:** [@ramc](https://discourse.paraview.org/u/ramc)\
**Replies:** 0\
**Last updated:** [January 16, 2021, 12:18pm UTC](https://discourse.paraview.org/t/paraview-issue-on-big-sur/6239 "2021-01-16T12:18:22Z")

</div>

Dear Developers! I am facing issue on my MacBook Pro 16" running Big Sur. I have installed paraview latest version but I could only run for 2 or 3 times after that it freezes and I cannot open pvd/vtk files to view agai…

---

## [Install problem - unable to open paraview 5.11 in windows server 2022](https://discourse.paraview.org/t/install-problem-unable-to-open-paraview-5-11-in-windows-server-2022/11973)

<div class="topic-metadata">

**Author:** [@ykevin09](https://discourse.paraview.org/u/ykevin09)\
**Replies:** 2\
**Last updated:** [April 27, 2023, 7:39pm UTC](https://discourse.paraview.org/t/install-problem-unable-to-open-paraview-5-11-in-windows-server-2022/11973 "2023-04-27T19:39:57Z")

</div>

Hi. I installed paraview 5.11 using the msi package in the new windows server 2022 without seeing a warning. When I open the software, the Output Messages window pops up and soon Paraview shuts down automatically before …

---

## [Data Axis appears distorted in 3D view](https://discourse.paraview.org/t/data-axis-appears-distorted-in-3d-view/10803)

<div class="topic-metadata">

**Author:** [@jht51](https://discourse.paraview.org/u/jht51)\
**Replies:** 2\
**Last updated:** [November 18, 2022, 3:57am UTC](https://discourse.paraview.org/t/data-axis-appears-distorted-in-3d-view/10803 "2022-11-18T03:57:25Z")

</div>

Hi, I am plotting a dataset in 3D and the ‘data axes grid’ appears distorted when I rotate in 3D. I’m running Paraview 5.9.0. But I have seen the same issue occur on 5.10.0. Below is an example of the data axes distorti…

---

## [Flagpole actor with mpi does not render correctly.](https://discourse.paraview.org/t/flagpole-actor-with-mpi-does-not-render-correctly/11064)

<div class="topic-metadata">

**Author:** [@mclarsen](https://discourse.paraview.org/u/mclarsen)\
**Replies:** 3\
**Last updated:** [February 1, 2023, 11:09pm UTC](https://discourse.paraview.org/t/flagpole-actor-with-mpi-does-not-render-correctly/11064 "2023-02-01T23:09:35Z")

</div>

Hi All, I came to ask about an issue I am encountering that I suspect is a compositing issue. Specifically, I am using paraview egl 5.10.0-RC1. I am using the flagpole actor for some annotations, but whenever I use MPI …

---

## [paraview 5.4.1 issue (legacy rendering backend)](https://discourse.paraview.org/t/paraview-5-4-1-issue-legacy-rendering-backend/8677)

<div class="topic-metadata">

**Author:** [@kkoma7942](https://discourse.paraview.org/u/kkoma7942)\
**Replies:** 1\
**Last updated:** [December 22, 2021, 7:04pm UTC](https://discourse.paraview.org/t/paraview-5-4-1-issue-legacy-rendering-backend/8677 "2021-12-22T19:04:55Z")

</div>

Hi~ everyone, I’m really happy to know this site. Actually, when I faced several issue with paraview, to solve that isuee takes such a long time by googling or several stuffs. I think this site is the perfect place to …

---

## [Setting ports for Singularity image Paraview IndeX Nvidia NGC](https://discourse.paraview.org/t/setting-ports-for-singularity-image-paraview-index-nvidia-ngc/6082)

<div class="topic-metadata">

**Author:** [@Devin\_Richard\_Bayly](https://discourse.paraview.org/u/Devin_Richard_Bayly)\
**Replies:** 1\
**Last updated:** [December 16, 2020, 10:02pm UTC](https://discourse.paraview.org/t/setting-ports-for-singularity-image-paraview-index-nvidia-ngc/6082 "2020-12-16T22:02:28Z")

</div>

Hello there, I’m trying to use the Paraview Index container https://ngc.nvidia.com/catalog/containers/nvidia-hpcvis:paraview-index, but since my HPC system is in use by many many other individuals the default port 8080 …

---

## [VTK Vector Labels](https://discourse.paraview.org/t/vtk-vector-labels/5890)

<div class="topic-metadata">

**Author:** [@Victor\_Saouma](https://discourse.paraview.org/u/Victor_Saouma)\
**Replies:** 1\
**Last updated:** [November 26, 2020, 1:54pm UTC](https://discourse.paraview.org/t/vtk-vector-labels/5890 "2020-11-26T13:54:18Z")

</div>

How can I explicitly define labels associated with vector (such as min, interm and max)? (those would correspond to the three eigenvalues of a tensor computed before loading the data to paraview)

---

## [Paraview 5.8 Mac installer](https://discourse.paraview.org/t/paraview-5-8-mac-installer/5366)

<div class="topic-metadata">

**Author:** [@kmilo9999](https://discourse.paraview.org/u/kmilo9999)\
**Replies:** 1\
**Last updated:** [September 16, 2020, 5:11pm UTC](https://discourse.paraview.org/t/paraview-5-8-mac-installer/5366 "2020-09-16T17:11:54Z")

</div>

Hello, We tried to install ParaView-5.8.0-MPI-OSX10.12-Python2.7-64bit.dmg using on a mac book pro with Catalina 10.15.6, but we get the error: “There may be a problem with this disk image. Are you sure you want to op…

---

## [How to make Filter time aware when one of its input is from temporal reader](https://discourse.paraview.org/t/how-to-make-filter-time-aware-when-one-of-its-input-is-from-temporal-reader/4960)

<div class="topic-metadata">

**Author:** [@sharon](https://discourse.paraview.org/u/sharon)\
**Replies:** 1\
**Last updated:** [July 29, 2020, 10:05am UTC](https://discourse.paraview.org/t/how-to-make-filter-time-aware-when-one-of-its-input-is-from-temporal-reader/4960 "2020-07-29T10:05:59Z")

</div>

Dear All, I write one filter that has two input, one is vtkPolyData and the other is vtkTable. It special is vtkTable is from time series files. When i load time series files for vtkTable data, then i apply it with my…

---

## [Custom applications don't work](https://discourse.paraview.org/t/custom-applications-dont-work/8983)

<div class="topic-metadata">

**Author:** [@pindakaas](https://discourse.paraview.org/u/pindakaas)\
**Replies:** 1\
**Last updated:** [February 16, 2022, 2:23pm UTC](https://discourse.paraview.org/t/custom-applications-dont-work/8983 "2022-02-16T14:23:44Z")

</div>

Hi, I have been trying to build the custom apps from the examples (Demo0, SimpleParaView) with no success. My build procedure is as follows. x64 Native Tools Command Prompt for VS 2019: cmake -S path\_to\_example\_sourc…

---

## [Python Plugin: Decorator Ordering](https://discourse.paraview.org/t/python-plugin-decorator-ordering/7813)

<div class="topic-metadata">

**Author:** [@Jared\_Blanchard](https://discourse.paraview.org/u/Jared_Blanchard)\
**Replies:** 1\
**Last updated:** [August 12, 2021, 6:54pm UTC](https://discourse.paraview.org/t/python-plugin-decorator-ordering/7813 "2021-08-12T18:54:07Z")

</div>

I’ve noticed when I add decorators in a plugin, they do not appear in the same order they appear in the code. Is there a way to determine the ordering of the decorators, maybe some sort of priority variable?

---

## [Using ParaView without rendering?](https://discourse.paraview.org/t/using-paraview-without-rendering/5634)

<div class="topic-metadata">

**Author:** [@Noam\_Gat](https://discourse.paraview.org/u/Noam_Gat)\
**Replies:** 1\
**Last updated:** [October 23, 2020, 7:47am UTC](https://discourse.paraview.org/t/using-paraview-without-rendering/5634 "2020-10-23T07:47:24Z")

</div>

Hi, I am looking at Paraview for ray traced simulation needs. Simply put, I have a lot (thousands if not more) of static scenes (but programatically generated) containing between 1k-10k cubes, and I would like to rayca…

[Previous page](https://discourse.paraview.org/top.md?page=128&per_page=50&period=all)

[Next page](https://discourse.paraview.org/top.md?page=130&per_page=50&period=all)